Jump to main text
Wailuku Drywall Repairs
(808) 500-9395Call 7 days, 7am–9pm
Start your repair
(808) 500-9395

Drywall service

Drywall Hole Repair in Wailuku, HI

Drywall hole repair in Wailuku covers the everyday damage: a door handle punched into the wall behind a door, a dent from a moving dolly, the anchor holes left when a TV comes down, a corner crushed by a suitcase. The hole's size sets the repair technique, and that technique in turn decides how the patch looks a month later.

Hole size: three methods for three scales

Under half an inch

Nail holes, screw holes, anchor holes

Overfilled with lightweight spackle, which shrinks very little, then sanded flush. Plastic anchors are pushed in or cut off below the surface first, or they print through.

Up to about six inches

Doorknob holes, small impacts

A California patch, a piece of board with its paper face left long on all sides so the paper acts as tape, or a metal-backed patch. Two or three feathered coats over it.

Larger than a hand

Furniture and moving damage, kicked-in panels

Cut square back to the nearest studs or backed with wood cleats, new board screwed in, seams taped with paper and finished like a new wall.

Cross-section of a backed drywall patch with tape and three coats of compound, each wider than the last 3rd coat, widest, feathered thin 2nd coat paper tape 1st coat new board, cut slightly undersize wood cleat (backing) existing board
How a larger hole is closed: wood backing behind the opening, new board, tape over the joints, then three coats spread progressively wider.

Outside corners: the dents people live with too long

An outside corner is protected by corner bead, a metal or vinyl angle buried under compound. When a cart or a suitcase hits it, the bead bends and the compound over it cracks loose. Filling the dent leaves a weak lump that breaks off the next time. The damaged length of bead is cut out, a new piece is fastened and bedded, and the corner is coated out a few inches on both faces so it comes back to a straight line.

Move-outs and rentals: a whole house of small holes

When a rental in Wailuku or Kahului changes tenants, the move-out often means dozens of small holes from pictures, shelves and wall mounts in every room. Done room by room in one pass, those are a modest job. We ask for a room-by-room count, or a few photos, so the quote reflects what is really there.

Housing here: what changes how a hole is patched

The 2020 census put Wailuku's population at 17,697, and its houses run from homes of the sugar-plantation era to subdivisions like Kehalani, built in the 1990s. Some older houses have walls that are not drywall at all but wood boards or another panel, which changes how a hole is closed; a photo tells us which you have before anyone arrives. In newer houses the texture is usually the thing to get right, and a close photo taken with light from the side shows it clearly. And because the air here stays humid, with Kahului Airport averaging around 73 percent relative humidity, compound takes longer to dry between coats than in a dry climate, so a careful hole repair is usually spread over more than one visit.

Price range: what national guides say about small patches

Inch Calculator's national cost guide for drywall estimates a small repair, such as a patch, popped screws or a stress crack including repainting, at about $60 to $200, and says larger holes, more than six inches across, start at about $100. Those are national averages rather than prices in Wailuku. The price on a given wall depends on how many holes there are, whether a ladder is involved, how much texture has to be reproduced, and whether painting is included.

Questions: holes, dents and how patches look later

Could the patch be visible after painting?

Not when the compound is spread well past the hole, re-textured to suit the wall and primed before painting. Patches that show are usually ones that were painted straight over bare compound, which absorbs paint differently and flashes.

Is a hole repair a one-visit job?

The hands-on work is short, but compound must cure between coats. A small hole is often done in a single trip with a setting compound; a larger patch usually takes two short visits on different days.

How much dust does it make?

Less than you might fear. Drop cloths go down and nearby furniture gets sheeted, sanding is kept light by applying thin coats, and the area is vacuumed when the work wraps up.

Your wall: describe it and get a price

Ring the number, text over a snapshot of the wall, or send the online request. A short description and one clear picture are enough to start.

Your description goes to a local pro, who calls to arrange a look at the damage and a price for it before work begins.

Call 7 days, 7am–9pm

Call (808) 500-9395Show us the wall